En poursuivant votre navigation ou en cliquant sur "Accepter", vous nous autorisez à collecter des données statistiques de manière anonyme :
Photo non contractuelle. L'aspect, la teinte, la finition et l'état peuvent varier.

VALVE VENTILATION VAPEUR HUILE S/COLLECTEUR "ORIGINE" NOIRE

36.20  TTC

Numéro : 175C
Réf. : WOA6895
Poids : 0,10 Kg

Code Anti-Spam *

Description



The crankcase ventilation system

Currently, despite the rapid development of technology, to create a completely sealed friction of the parts — the cylinder and the piston ring is not possible. Therefore, in the internal combustion engine over time during the operation of combustion products accumulate.In the sump of crankcase gases pass through the piston rings, which are adjacent to the cylinders loose. The result is worse than the heat is removed, reducing the lifetime lubricating fluid and formed excessive pressure on all block seals. The crankcase ventilation system prevents excessive crankcase pressure.



Development device


At the beginning of the mechanism is as follows: from the case just output tube, producing gases into the atmosphere and polluting it. But the norms for emission of gases from vehicles was seriously tightened. Therefore, the crankcase ventilation system had to be developed by manufacturers.



The Principle of operation of mechanism

In the form in which the system currently known, gases are not simply emitted into the atmosphere. They are sent to the motor by means of the derived tube from the crankcase, the other end of which is connected to the intake manifold. From there the gas is directed into the combustion chamber. At the time of the outbreak some of them burned and the other part is discharged through the exhaust mechanism. Only a small fraction of these gases back into the crankcase. So the process occurs without interruption.
Nom d'origine (U.S.) : VALVE, ENGINE CRANKCASE VENTILATOR ASSY "ORIGINE"

Produits en stock

CALE SOUS BO DE CALANDRE FORD GPW
CALE SOUS BO DE CALANDRE FORD GPW
Réf. 436C
6,22 €
CONNECTEUR DOUBLE 1/1 FAISCEAU JEEP
CONNECTEUR DOUBLE 1/1 FAISCEAU JEEP
Réf. 451
3,20 €
CLE DEMONTAGE ECROU DE ROUE MB
CLE DEMONTAGE ECROU DE ROUE MB
Réf. 1711
15,95 €
PATTE LIAISON CADRE BATTERIE - AILE
PATTE LIAISON CADRE BATTERIE - AILE
Réf. 525
5,20 €
FAISCEAU COMPLET DU PROJECTEUR BO D'AILE US
FAISCEAU COMPLET DU PROJECTEUR BO D'AILE US
Réf. 475L
24,30 €
TROMPETTE SPARTON NU
TROMPETTE SPARTON NU
Réf. 405B
57,60 €
VIS 5/16 NC 1" - 25MM
VIS 5/16 NC 1" - 25MM
Réf. VS16
1,12 €
POCHOIR SHIPPING MARQUAGE REMORQUE JEEP 1/4T
POCHOIR SHIPPING MARQUAGE REMORQUE JEEP 1/4T
Réf. 1610
15,80 €
RONDELLE SPECIALE BUTÉE SUR AXE PÉDALE (X3)
RONDELLE SPECIALE BUTÉE SUR AXE PÉDALE (X3)
Réf. 214F
4,47 €
PLAQUES ZINC DODGE WC 63
PLAQUES ZINC DODGE WC 63
Réf. 1512AC
83,72 €
FLOTTEUR & LEVIER CARBU CARTER
FLOTTEUR & LEVIER CARBU CARTER
Réf. 260
27,00 €
PEDALE D'ACCELERATEUR WILLYS MB
PEDALE D'ACCELERATEUR WILLYS MB
Réf. 285
28,70 €
GOUJON COLLECTEUR COURT 3/8
GOUJON COLLECTEUR COURT 3/8
Réf. 68
2,95 €
SUPPORT AMORTISSEUR AR GAUCHE/DROIT FORD GPW
SUPPORT AMORTISSEUR AR GAUCHE/DROIT FORD GPW
Réf. 1071A
77,90 €
PLAQUE DEMARREUR AUTOLITE 12V
PLAQUE DEMARREUR AUTOLITE 12V
Réf. 1479J
14,40 €
TRANSMETTEUR ESSENCE 6-12-24V - 1ER MODELE
TRANSMETTEUR ESSENCE 6-12-24V - 1ER MODELE
Réf. 313GP
39,80 €
MUSETTE TOILE TYPE "DEMOLITION BAG" JEU DE 4
MUSETTE TOILE TYPE "DEMOLITION BAG" JEU DE 4
Réf. 1785H
46,64 €
CABLE TENDEUR MOTEUR MB
CABLE TENDEUR MOTEUR MB
Réf. 13
16,55 €
VIS FORD GPW 5/16NC-5/8" (15,9mm)
VIS FORD GPW 5/16NC-5/8" (15,9mm)
Réf. 3521E
1,44 €
RENFORT VERTICAL DROIT PANNEAU AR JEEP
RENFORT VERTICAL DROIT PANNEAU AR JEEP
Réf. 1290C
16,62 €