En poursuivant votre navigation ou en cliquant sur "Accepter", vous nous autorisez à collecter des données statistiques de manière anonyme :

En cette période, nos délais d'envoi des commandes est allongé , merci pour votre indulgence. Jeepement vôtre

Photo non contractuelle. L'aspect, la teinte, la finition et l'état peuvent varier.

VALVE VENTILATION VAPEUR HUILE S/COLLECTEUR "ORIGINE" NOIRE

36.20  TTC

Numéro : 175C
Réf. : WOA6895
Poids : 0,10 Kg
Dernières pièces en stock !

Description



The crankcase ventilation system

Currently, despite the rapid development of technology, to create a completely sealed friction of the parts — the cylinder and the piston ring is not possible. Therefore, in the internal combustion engine over time during the operation of combustion products accumulate.In the sump of crankcase gases pass through the piston rings, which are adjacent to the cylinders loose. The result is worse than the heat is removed, reducing the lifetime lubricating fluid and formed excessive pressure on all block seals. The crankcase ventilation system prevents excessive crankcase pressure.



Development device


At the beginning of the mechanism is as follows: from the case just output tube, producing gases into the atmosphere and polluting it. But the norms for emission of gases from vehicles was seriously tightened. Therefore, the crankcase ventilation system had to be developed by manufacturers.



The Principle of operation of mechanism

In the form in which the system currently known, gases are not simply emitted into the atmosphere. They are sent to the motor by means of the derived tube from the crankcase, the other end of which is connected to the intake manifold. From there the gas is directed into the combustion chamber. At the time of the outbreak some of them burned and the other part is discharged through the exhaust mechanism. Only a small fraction of these gases back into the crankcase. So the process occurs without interruption.
Nom d'origine (U.S.) : VALVE, ENGINE CRANKCASE VENTILATOR ASSY "ORIGINE"

Produits en stock

PLAQUES WRECKER WARD LA France
PLAQUES WRECKER WARD LA France
Réf. 1512AQ
218,40 €
BOUCHON S/CARTER BV/BT VIDANGE/REMPLISSAGE
BOUCHON S/CARTER BV/BT VIDANGE/REMPLISSAGE
Réf. 683
2,39 €
DURITE AIR GM FILTRE / TUBE M201 24V
DURITE AIR GM FILTRE / TUBE M201 24V
Réf. 252
6,76 €
PORTE ARRIERE CAISSE DODGE US
PORTE ARRIERE CAISSE DODGE US
Réf. CC010
229,35 €
JOINT CULASSE MOTEUR JEEP DE QUALITÉ
JOINT CULASSE MOTEUR JEEP DE QUALITÉ
Réf. 94ST
29,90 €
PORTE CLEFS D-DAY
PORTE CLEFS D-DAY
Réf. 1853D
3,98 €
2,90 €
KIT REGULATEUR 24V ELECTRONIQUE
KIT REGULATEUR 24V ELECTRONIQUE
Réf. 508R
179,32 €
POCHOIR BOITE MUNITIONS CAL.30
POCHOIR BOITE MUNITIONS CAL.30
Réf. 1633
10,20 €
VIS CULASSE FORD GPW - GPA « F »
VIS CULASSE FORD GPW - GPA « F »
Réf. 182
6,00 €
JOINT COLLECTEUR/TUBE ECHAPPEMENT
JOINT COLLECTEUR/TUBE ECHAPPEMENT
Réf. 97
2,92 €
MUSETTE TOILE TYPE "DEMOLITION BAG" JEU DE 4
MUSETTE TOILE TYPE "DEMOLITION BAG" JEU DE 4
Réf. 1785H
46,64 €
ARMATURE NUE AV. PASSAGER NEUVE MB-M201
ARMATURE NUE AV. PASSAGER NEUVE MB-M201
Réf. 1143
116,00 €
COLLIER FIX COUDE AIR S/CARBU
COLLIER FIX COUDE AIR S/CARBU
Réf. 242A
7,15 €
TETE D'ALLUMEUR INTERIEUR ABG 24V
TETE D'ALLUMEUR INTERIEUR ABG 24V
Réf. 667
24,00 €
ROTULES US BARRE ACCOUPLEMENT (JEU DE 4)
ROTULES US BARRE ACCOUPLEMENT (JEU DE 4)
Réf. 1033K
64,97 €
COLONNE CENTRALE M31C JEEP - CAL.30 / .50 + RENFORTS 3161H
COLONNE CENTRALE M31C JEEP - CAL.30 / .50 + RENFORTS 3161H
Réf. 3157
595,00 €
ECROU 5/16 NC EPAISSEUR 5MM GRIS
ECROU 5/16 NC EPAISSEUR 5MM GRIS
Réf. EC3A
0,15 €
CROCHET FIXATION AVD SANGLE RESERV S/PLANCHER
CROCHET FIXATION AVD SANGLE RESERV S/PLANCHER
Réf. 246
4,95 €
JOINT ARBRE DE ROUE ARRIÈRE
JOINT ARBRE DE ROUE ARRIÈRE
Réf. 858
1,80 €
SUPPORT EQUERRE DE BRAS COLONNE M31C S/CHASSIS (X2)
SUPPORT EQUERRE DE BRAS COLONNE M31C S/CHASSIS (X2)
Réf. 3144K
43,00 €