En poursuivant votre navigation ou en cliquant sur "Accepter", vous nous autorisez à collecter des données statistiques de manière anonyme :
Photo non contractuelle. L'aspect, la teinte, la finition et l'état peuvent varier.

VALVE VENTILATION VAPEUR HUILE S/COLLECTEUR "ORIGINE" NOIRE

36.20  TTC

Numéro : 175C
Réf. : WOA6895
Poids : 0,10 Kg

Code Anti-Spam *

Description



The crankcase ventilation system

Currently, despite the rapid development of technology, to create a completely sealed friction of the parts — the cylinder and the piston ring is not possible. Therefore, in the internal combustion engine over time during the operation of combustion products accumulate.In the sump of crankcase gases pass through the piston rings, which are adjacent to the cylinders loose. The result is worse than the heat is removed, reducing the lifetime lubricating fluid and formed excessive pressure on all block seals. The crankcase ventilation system prevents excessive crankcase pressure.



Development device


At the beginning of the mechanism is as follows: from the case just output tube, producing gases into the atmosphere and polluting it. But the norms for emission of gases from vehicles was seriously tightened. Therefore, the crankcase ventilation system had to be developed by manufacturers.



The Principle of operation of mechanism

In the form in which the system currently known, gases are not simply emitted into the atmosphere. They are sent to the motor by means of the derived tube from the crankcase, the other end of which is connected to the intake manifold. From there the gas is directed into the combustion chamber. At the time of the outbreak some of them burned and the other part is discharged through the exhaust mechanism. Only a small fraction of these gases back into the crankcase. So the process occurs without interruption.
Nom d'origine (U.S.) : VALVE, ENGINE CRANKCASE VENTILATOR ASSY "ORIGINE"

Produits en stock

AMPOULE 2 PLOTS 6V 21/5 WATTS
AMPOULE 2 PLOTS 6V 21/5 WATTS
Réf. 401
3,41 €
CABLE CDE FOURCHETTE EMBRAYAGE
CABLE CDE FOURCHETTE EMBRAYAGE
Réf. 196
15,00 €
RESSORT RAPPEL MACHOIRE DE FREIN
RESSORT RAPPEL MACHOIRE DE FREIN
Réf. 916
2,89 €
SUPPORT PIVOT PORTE ARRIERE DODGE LA PAIRE
SUPPORT PIVOT PORTE ARRIERE DODGE LA PAIRE
Réf. CC003
20,10 €
PLANCHER ARRIERE NU SANS REHAUSSE
PLANCHER ARRIERE NU SANS REHAUSSE
Réf. 1265N
199,00 €
CHASSIS NU TYPE FORD GPW
CHASSIS NU TYPE FORD GPW
Réf. 1047F
2 890,00 €
CENTRALE CLIGNOTANTE 12 VOLTS
CENTRALE CLIGNOTANTE 12 VOLTS
Réf. 597
20,58 €
GOUJON CULASSE S/BLOC COURT US
GOUJON CULASSE S/BLOC COURT US
Réf. 71
6,00 €
AMORTISSEUR AVANT USA + 4 SILENTBLOCS
AMORTISSEUR AVANT USA + 4 SILENTBLOCS
Réf. 1087ST
39,00 €
KIT CONVERSION ALLUMAGE 24V BLINDÉ EN NORMALE
KIT CONVERSION ALLUMAGE 24V BLINDÉ EN NORMALE
Réf. 646
336,34 €
TREPIED M2 CAL.30 APRES GUERRE A RECONDITIONNER
TREPIED M2 CAL.30 APRES GUERRE A RECONDITIONNER
Réf. 3006B10
399,00 €
SUPPORT ROUE DE SECOURS 3 POINTS FORD GPW
SUPPORT ROUE DE SECOURS 3 POINTS FORD GPW
Réf. 1328F
63,00 €
GAINE COTON TRAITEE ASPHALT U.S.A. "LEZARD" 1/8"
GAINE COTON TRAITEE ASPHALT U.S.A.  "LEZARD"  1/8"
Réf. 482
6,18 €
DECALCOMANIE U.S. "FRAM" FILTRE A HUILE WILLYS / DODGE
DECALCOMANIE U.S. "FRAM" FILTRE A HUILE WILLYS / DODGE
Réf. 1462
7,55 €
SILENTBLOCS BT JEEP (KIT GM + PM +VIS)
SILENTBLOCS BT JEEP (KIT GM + PM +VIS)
Réf. 795
16,90 €
TIGE POUSSEE MAITRE CYLINDRE MB JEEP
TIGE POUSSEE MAITRE CYLINDRE MB JEEP
Réf. 922W
6,10 €
BOCAL NIVEAU LIQUIDE FREIN + SUPPORT
BOCAL NIVEAU LIQUIDE FREIN + SUPPORT
Réf. 875D
24,60 €
ECROU 7/16 NF EPAISSEUR 10MM GRIS FER
ECROU 7/16 NF EPAISSEUR 10MM GRIS FER
Réf. EC12A
0,40 €
TRESSES DE SANGLES RESERVOIR (JEU DE 4)
TRESSES DE SANGLES RESERVOIR (JEU DE 4)
Réf. 323
8,92 €
BAGUE DE VOLANT MOTEUR GRAPHITEE RENFORCEE
BAGUE DE VOLANT MOTEUR GRAPHITEE RENFORCEE
Réf. 7B
9,34 €