En poursuivant votre navigation ou en cliquant sur "Accepter", vous nous autorisez à collecter des données statistiques de manière anonyme :

En cette période, nos délais d'envoi des commandes est allongé , merci pour votre indulgence. Jeepement vôtre

Photo non contractuelle. L'aspect, la teinte, la finition et l'état peuvent varier.

VALVE VENTILATION VAPEUR HUILE S/COLLECTEUR "ORIGINE" NOIRE

36.20  TTC

Numéro : 175C
Réf. : WOA6895
Poids : 0,10 Kg
Dernières pièces en stock !

Description



The crankcase ventilation system

Currently, despite the rapid development of technology, to create a completely sealed friction of the parts — the cylinder and the piston ring is not possible. Therefore, in the internal combustion engine over time during the operation of combustion products accumulate.In the sump of crankcase gases pass through the piston rings, which are adjacent to the cylinders loose. The result is worse than the heat is removed, reducing the lifetime lubricating fluid and formed excessive pressure on all block seals. The crankcase ventilation system prevents excessive crankcase pressure.



Development device


At the beginning of the mechanism is as follows: from the case just output tube, producing gases into the atmosphere and polluting it. But the norms for emission of gases from vehicles was seriously tightened. Therefore, the crankcase ventilation system had to be developed by manufacturers.



The Principle of operation of mechanism

In the form in which the system currently known, gases are not simply emitted into the atmosphere. They are sent to the motor by means of the derived tube from the crankcase, the other end of which is connected to the intake manifold. From there the gas is directed into the combustion chamber. At the time of the outbreak some of them burned and the other part is discharged through the exhaust mechanism. Only a small fraction of these gases back into the crankcase. So the process occurs without interruption.
Nom d'origine (U.S.) : VALVE, ENGINE CRANKCASE VENTILATOR ASSY "ORIGINE"

Produits en stock

JOINTS POCHETTE COMPLETE AVEC SPI BT
JOINTS POCHETTE COMPLETE AVEC SPI BT
Réf. 773
19,00 €
GRILLE - PLAQUETTE SOUS COUVERCLE BV + RIVETS
GRILLE - PLAQUETTE SOUS COUVERCLE BV + RIVETS
Réf. 698
9,20 €
SUPPORT EQUERRE DE BRAS COLONNE M31C S/CHASSIS (X2)
SUPPORT EQUERRE DE BRAS COLONNE M31C S/CHASSIS (X2)
Réf. 3144K
43,00 €
BOUCHON S/CARTER BV/BT VIDANGE/REMPLISSAGE
BOUCHON S/CARTER BV/BT VIDANGE/REMPLISSAGE
Réf. 683
2,39 €
KIT EMBRAYAGE JEEP 3 ELEMENTS
KIT EMBRAYAGE JEEP 3 ELEMENTS
Réf. 203W
149,98 €
KIT DURITES EAU + COLLIERS + TUBES M201
KIT DURITES EAU + COLLIERS + TUBES M201
Réf. 366
57,29 €
FEUTRE PASSAGE DIRECTION / PLANCHER
FEUTRE PASSAGE DIRECTION / PLANCHER
Réf. 1386
2,99 €
ECROU DE ROUE GAUCHE
ECROU DE ROUE GAUCHE
Réf. 970
1,50 €
AUTOCOLLANT PIN'UP US VINTAGE
AUTOCOLLANT PIN'UP US VINTAGE
Réf. 1455H
9,15 €
PIVOT BRAS BALAI ESSUIE GLACE ELECTRIQUE M201 - Couleur kaki
PIVOT BRAS BALAI ESSUIE GLACE ELECTRIQUE M201 - Couleur kaki
Réf. 1374D
26,92 €
CABLE COMPTEUR MB 6 OU 12 VOLTS METAL
CABLE COMPTEUR MB 6 OU 12 VOLTS METAL
Réf. 1364
27,52 €
FEUTRE PLAQUE REGARD MC / PLANCHER
FEUTRE PLAQUE REGARD MC / PLANCHER
Réf. 1388
3,81 €
ARBRE DE ROUE AV. DROIT RZEPPA
ARBRE DE ROUE AV. DROIT RZEPPA
Réf. 807
322,00 €
REPRO INERTE METAL PISTOLET P08 LUGER
REPRO INERTE METAL PISTOLET P08 LUGER
Réf. 3122
85,15 €
POIGNÉE CUIR RADIO SCR510/BC659 + VIS NOS
POIGNÉE CUIR RADIO SCR510/BC659 + VIS NOS
Réf. 2004
23,65 €
FLEXIBLE FREIN AVANT MOYEN
FLEXIBLE FREIN AVANT MOYEN
Réf. 888
10,65 €
KIT COMPLET REPARATION CARBU. SOLEX 32 PBIC
KIT COMPLET REPARATION CARBU. SOLEX 32 PBIC
Réf. 276
38,20 €
38,00 €
PLAQUE NUE EMBOUTIE "WILLYS" DE PANNEAU ARRIERE
PLAQUE NUE EMBOUTIE "WILLYS" DE PANNEAU ARRIERE
Réf. 1269A
22,72 €
BANDE DE 30 CARTOUCHES CAL.50 INERTE
BANDE DE 30 CARTOUCHES CAL.50 INERTE
Réf. 3070K
117,82 €
TUBE COUDE D'EAU DE RADIATEUR JEEP
TUBE COUDE D'EAU DE RADIATEUR JEEP
Réf. 386
14,99 €