En poursuivant votre navigation ou en cliquant sur "Accepter", vous nous autorisez à collecter des données statistiques de manière anonyme :

En cette période, nos délais d'envoi des commandes est allongé , merci pour votre indulgence. Jeepement vôtre

Photo non contractuelle. L'aspect, la teinte, la finition et l'état peuvent varier.

VALVE VENTILATION VAPEUR HUILE S/COLLECTEUR "ORIGINE" NOIRE

36.20  TTC

Numéro : 175C
Réf. : WOA6895
Poids : 0,10 Kg
Dernières pièces en stock !

Description



The crankcase ventilation system

Currently, despite the rapid development of technology, to create a completely sealed friction of the parts — the cylinder and the piston ring is not possible. Therefore, in the internal combustion engine over time during the operation of combustion products accumulate.In the sump of crankcase gases pass through the piston rings, which are adjacent to the cylinders loose. The result is worse than the heat is removed, reducing the lifetime lubricating fluid and formed excessive pressure on all block seals. The crankcase ventilation system prevents excessive crankcase pressure.



Development device


At the beginning of the mechanism is as follows: from the case just output tube, producing gases into the atmosphere and polluting it. But the norms for emission of gases from vehicles was seriously tightened. Therefore, the crankcase ventilation system had to be developed by manufacturers.



The Principle of operation of mechanism

In the form in which the system currently known, gases are not simply emitted into the atmosphere. They are sent to the motor by means of the derived tube from the crankcase, the other end of which is connected to the intake manifold. From there the gas is directed into the combustion chamber. At the time of the outbreak some of them burned and the other part is discharged through the exhaust mechanism. Only a small fraction of these gases back into the crankcase. So the process occurs without interruption.
Nom d'origine (U.S.) : VALVE, ENGINE CRANKCASE VENTILATOR ASSY "ORIGINE"

Produits en stock

PIGNON BALADEUR 37 DENTS BT NOS USA
PIGNON BALADEUR 37 DENTS BT NOS USA
Réf. 777
77,64 €
PEDALE DE FREIN NUE US WILLYS MB 42-43 MOULÉE
PEDALE DE FREIN NUE US WILLYS MB 42-43 MOULÉE
Réf. 909
28,92 €
KIT DURITES EAU + COLLIERS + TUBES MB - GPW
KIT DURITES EAU + COLLIERS + TUBES MB - GPW
Réf. 364
53,70 €
REPRO INERTE METAL COLT 45 US
REPRO INERTE METAL COLT 45 US
Réf. 3121
108,90 €
SOUPAPE D'ECHAPPEMENT MOTEUR (JEU DE 4)
SOUPAPE D'ECHAPPEMENT MOTEUR (JEU DE 4)
Réf. 166C
40,10 €
BAGUE DE VOLANT MOTEUR GRAPHITEE
BAGUE DE VOLANT MOTEUR GRAPHITEE
Réf. 7
6,97 €
HOUSSE DE GOURDE US REPRO
HOUSSE DE GOURDE US REPRO
Réf. 2179
12,00 €
PLAQUES NOMENCLATURES FORD ALUMINIUM JEU 01-1944 / 06-1944
PLAQUES NOMENCLATURES FORD ALUMINIUM JEU 01-1944 / 06-1944
Réf. 1477D
55,90 €
BOBINE DE FIL A SOUDURE MIG 0,9MM + 5 PANNES 0.9MM
BOBINE DE FIL A SOUDURE MIG 0,9MM + 5 PANNES 0.9MM
Réf. 1832Q
29,90 €
PASSAGE DE ROUE ARRIERE GAUCHE FORD GPW
PASSAGE DE ROUE ARRIERE GAUCHE FORD GPW
Réf. 1258
274,00 €
KIT EMBRAYAGE JEEP 3 ELEMENTS
KIT EMBRAYAGE JEEP 3 ELEMENTS
Réf. 203W
149,98 €
COLLIERS KIT FIXATION FAISCEAU WILLYS MB
COLLIERS KIT FIXATION FAISCEAU WILLYS MB
Réf. 444
46,64 €
FLEXIBLE DE FREIN JEEP (JEU DE 4)
FLEXIBLE DE FREIN JEEP (JEU DE 4)
Réf. 890
37,72 €
BAGUE BRONZE EXTREMITE CARTER BOL
BAGUE BRONZE EXTREMITE CARTER BOL
Réf. 808C
6,89 €
RETROVISEUR U.S. STANDARD
RETROVISEUR U.S. STANDARD
Réf. 1378V
22,92 €
MOTEUR NEUF COMPLET GPW - Version 3
MOTEUR NEUF COMPLET GPW - Version 3
Réf. GPW-ENGV3
13 026,00 €
REPOSE PIED PEDALE ACCELERATEUR
REPOSE PIED PEDALE ACCELERATEUR
Réf. 293
6,94 €
PORTE CLEFS D-DAY
PORTE CLEFS D-DAY
Réf. 1853D
3,98 €
2,90 €
HOUSSE DE PELLE "EN T" REPRO
HOUSSE DE PELLE "EN T" REPRO
Réf. 2230
9,97 €
LANTERNE ARRIERE DROITE BO 6 VOLTS GUIDE MVS
LANTERNE ARRIERE DROITE BO 6 VOLTS GUIDE MVS
Réf. 509J
69,82 €